Which of the following operations need to be entered on the Oil Record Book Part I?（）
(1) Cleaning of fuel oil tanks
(2) Internal transfer of fuel oil
A.（1）only
B.（2）only
C.both（1）and（2）
D.neither（1）nor（2）
您可能感興趣的試卷
你可能感興趣的試題
Which of the following operations need NOT to be entered on the Oil Record Book Part I?（）
(1) Disposal of oil residues
(2) Internal transfer of fuel oil
A.（1）only
B.（2）only
C.both（1）and（2）
D.neither（1）nor（2）
A.telemeter
B.telemanometer
C.telemotor
D.telemometer
A.fresh water
B.fresh air
C.salt water
D.artificial respiration
A.rub the eyes
B.irritate the eyes
C.wash the eyes with a heavy boric acid solution
D.obtain medical help
A.Refrigeration
B.Air conditioning
C.Ventilation
D.Heating
最新試題
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be （）.
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should （）.
The rate of heat transfer from a hot region to a cold region is affected most by the （）.
If the suction pressure at the refrigeration compressor is below normal, the cause can be（）.
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is （）.
Thermostatic expansion valves can be adjusted for （）.
The general purpose of a heat exchanger is to （）.
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by （）.
The control mode in which the final control element is moved from one of two flexed positions to the other is known as （）.
A grease gun is generally used to lubricate a （）.