A.the bow
B.the stem
C.the port side
D.the starboard side
您可能感興趣的試卷
你可能感興趣的試題
A.the distillate produced has greater purity
B.no boiling occurs on heat transfer surfaces
C.evaporation occurs at a higher rate
D.the incoming feed is at a higher temperature
A.the system is fully charged
B.there is air leaking in from the condenser
C.ice crystals are forming in the refrigerant
D.the system contains less than a full charge of refrigerant
A.Simplex
B.Duplex
C.Canister
D.Bypass
A.condition of the expansion valve
B.moisture in the system
C.condition of the compressor suction valves
D.condenser temperature
A.trick wheel
B.accumulator
C.standby pump
D.telemotor
最新試題
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by （）.
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by （）.
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is （）.
Who is responsible for ensuring that someone is assigned to close the watertight doors in an emergency?（）
The rate of heat transfer from a hot region to a cold region is affected most by the （）.
The usual symptoms of cavitation in a centrifugal pump is （）.
The control mode in which the final control element is moved from one of two flexed positions to the other is known as （）.
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by （）.
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will （）.
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be （）.