A.AC voltage to the armature
B.AC voltage to the field
C.DC voltage to the armature
D.DC voltage to the field
您可能感興趣的試卷
你可能感興趣的試題
A.wash it with fresh water and apply an external source of heat
B.renew the windings
C.send it ashore to an approved service facility
D.rinse all electrical parts with a carbon tetrachloride cleaning solvent and then blow dry the motor with compressed air
A.the recommended current and voltage rating
B.higher current and voltage rating
C.higher current and lower voltage rating
D.lower current and higher voltage rating
A.prime mover governor
B.exciter generator
C.voltage regulator
D.reverse power relay
A.Dram
B.Salient pole
C.Squirrel-cage
D.Wound-rotor
A.load limit settings
B.idle speed settings
C.speed limit settings
D.speed droop settings
最新試題
The condensers located in various stages of a flash evaporator are cooled by()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
To proceed to the assistance of a ship in distress is()
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
The ISPS Code consists of a mandatory section-Part A, which shows()
Using a file without a handle may result in ()
Cold weather starting of a diesel engine may be made easier by()
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the()