A.hydrogen chloride
B.calcium chloride
C.sulfuric acid
D.muriatic acid
您可能感興趣的試卷
你可能感興趣的試題
A.can be reset to energize the circuit
B.should open the circuit when overloaded
C.will burn out when an over current flow develops
D.All of the above
A.limit
B.monitor
C.modulator
D.interlock
A.relative speed of the rotor poles
B.number of turns of wire in the armature coil
C.strength of the magnets used
D.output voltage
A.loss of residual magnetism
B.absorption of moisture in the insulation
C.insulation varnish flaking
D.dirt collecting on the windings
A.inductance
B.capacitance
C.resistance
D.amperage
最新試題
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
Using a file without a handle may result in （）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
The cetane rating of diesel fuel is an indication of the （）
If separating effect is not good, which measure should be taken （）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
The treatment of the fuel oils involves storage, heating, filtering and（）
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The main purpose of port State control is not to（）