Some large A-Cmotors are equipped with heatersThese could be （）
(1)resistance heaters bolted directly to the frame
(2)low voltage windings embedded in the motor windings
A.(1) only
B.(2) only
C.either (1) or (2)
D.neither (1) or (2)
您可能感興趣的試卷
你可能感興趣的試題
In order to change the direction of rotation of a D-Cmotor （）
(1) the field leads must be changed
(2) the input leads must be changed
A.（1）only
B.（2）only
C.either（1）or（2）
D.neither（1）or（2）
If a small electric motor is immersed in salt water it should be （）
(1) washed in fresh water
(2) dried in an oven
A.(1) only
B.(2) only
C.both (1) and (2)
D.neither (1) or (2)
A.ampere
B.kilovolt
C.watt
D.farad
A.wasted energy
B.efficient operation
C.a short in the exciter field windings
D.an excessive number of minor system grounds
A.increase
B.not change
C.decrease
D.be exactly 60 hertz
最新試題
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）
The ISPS Code consists of a mandatory section-Part A, which shows（）
Using a file without a handle may result in （）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
（） is not installed on the main switchboar.
Diesel engine air start system check valves are opened by （）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）