A.flame relief valve
B.flame stopper
C.safety valve
D.flame arrester
您可能感興趣的試卷
你可能感興趣的試題
A.condensation in the fuel tank
B.a crack in the hull portion of the fuel tank
C.a load of bad fuel
D.contamination from the saltwater flushing system
A.sounding the tank
B.waiting for the vessel to list
C.examining tank boundaries
D.checking fuel oil strainers
A.on the outgoing tide
B.overboard after dark
C.overboard through an oily water separator
D.anytime in an emergency, i-emain engine lube oil failure
A.drained into the vessels bilges
B.reclaimed for other uses
C.held in a slop tank
D.purified and then reused
A.when the remaining charge volume is less than 90 percent of the required VOLUME
B.at each inspection for certification
C.at each annual inspection
D.when the weight loss exceeds 10% of weight of charge
最新試題
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?（）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
The main purpose of port State control is not to（）
To proceed to the assistance of a ship in distress is（）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）