A.Secure the burners then proceed to your assigned boat station
B.Start the fire pump and establish flow to the fire main
C.Open the guardian valve and standby to maneuver
D.Open the master control valves on the fixed CO2 system
您可能感興趣的試卷
你可能感興趣的試題
A.125 mm
B.183 mm
C.215 mm
D.It depends on outside pipe diameter
A.canister-type gas mask
B.fresh-air breathing apparatus
C.self-contained breathing apparatus
D.combustible gas indicator
A.One man report the fire, and the other two men fight the fire
B.One man report the fire, one man fight the fire, and one man evacuate and secure the area
C.One man report the fire, one man fight the fire, and one man act as a safety observer
D.All three men fight the fire and report it immediately after it is extinguished
A.holding its slops onboard until they can be pumped into the city sewer system
B.circulating them through the lube oil purifier to remove water and debris
C.holding its slops onboard until they can be discharged to a shore side reception facility
D.pumping them into a settling tank for separation before pumping the oily water residue overboard
A.locate the fire
B.determine which type of fire is burning
C.sound the alarm
D.fight the fire
最新試題
The additional mark ()in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
() is not installed on the main switchboar.
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
Diesel engine air start system check valves are opened by ()