A.the compressor suction pressure is not too high
B.all air is purged from the pump and charging fittings
C.the high pressure cutout switch is held open to prevent accidental starting
D.the condenser is completely shutdown first
您可能感興趣的試卷
你可能感興趣的試題
A.box temperature solenoid valve will close
B.expansion valve will close
C.compressor will shutdown
D.king valve will open
A.stop-check valves installed in the bilge manifolds
B.using a positive displacement reciprocating bilge pump
C.installing eductors in all bilge rose boxes
D.installing a swing check before each bilge valve
A.liquid strainer
B.liquid receiver
C.saltwater condenser
D.evaporator
A.SEA WORTHINESS
B.SEA TRIALS
C.TRIAL-AND-ERROR
D.DOCK TRIALS
A.REEFER
B.RO/RO SHIP
C.CONTAINER
D.TANKER
最新試題
The treatment of the fuel oils involves storage, heating, filtering and（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
If separating effect is not good, which measure should be taken （）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
To proceed to the assistance of a ship in distress is（）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）