A.bypass exhaust gas at high loads to prevent excessive back pressure
B.bypass a portion of the exhaust gas at peak loads for better efficiency
C.recycle exhaust gas to the turbocharger
D.minimize moisture condensation in the boiler gas passages at low loads
您可能感興趣的試卷
你可能感興趣的試題
A.Correct the cause of the scoring and repair the sleeve or replace with a new one
B.Reassemble the unit and provide more water leak off for proper lubrication
C.Check for parallel alignment of the sleeve radial faces to the sleeve bores
D.Reassemble the unit and adjust the governor to obtain a slower speed
A.Copper
B.Copper and carbon
C.Carbon
D.Bronze
A.Chilled water system supply temperature
B.Chilled water system return temperature
C.Compressor discharge temperature
D.Compressor suction pressure
A.water
B.voltage
C.fuel pressure
D.steam pressure
A.sliding bowl bottom
B.bowl hood
C.bowl
D.filter units
最新試題
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）
Cold weather starting of a diesel engine may be made easier by（）
The treatment of the fuel oils involves storage, heating, filtering and（）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
The shipboard oil pollution emergency plan will be invalid after （）
If separating effect is not good, which measure should be taken （）