A.dirt
B.fuel oil
C.governor cooling water
D.fuel oil tars
您可能感興趣的試卷
你可能感興趣的試題
A.Sensitivity
B.Power
C.Speed droop
D.Compensation
A.excessive time required for warming-up
B.excessive freshwater corrosion
C.scale formation on the saltwater side
D.saltwater mixing with the freshwater
A.changes the position of the fuel inlet ports
B.changes the length of the pump stroke
C.varies the quantity of fuel delivered
D.varies the compression of the delivery valve spring
A.high fuel oil viscosity
B.low fuel oil temperature
C.high lube oil viscosity
D.energized glow plugs
A.Exhaust temperature
B.Lube oil level
C.Lube oil pressure
D.Water level in the expansion tank
最新試題
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
Cold weather starting of a diesel engine may be made easier by（）
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
The condensers located in various stages of a flash evaporator are cooled by（）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）