A.turbocharger
B.injection nozzle tip
C.carburetor
D.fuel oil pump
您可能感興趣的試卷
你可能感興趣的試題
A.fuel nozzle holders
B.exhaust value guides
C.engine cylinder liners
D.low temperature and a low viscosity
A.Baffle plates that have been bent during prior removal
B.Leaks in the cooler tube nest
C.Operating the engine while maintaining a high sea water outlet temperature
D.A punctured sea water strainer supplying cooling water to the heat exchanger
A.require no lubrication under normal operating conditions
B.compensate for gross misalignment in the drive train
C.are able to transmit high torque ,even where slight misalignment exists
D.will rapidly disconnect the engine from the line shaft
A.higher raw water temperatures
B.higher jacket water temperatures
C.a malfunctioning thermostat
D.higher fuel temperature
A.camshaft
B.crankshaft
C.governor
D.flywheel
最新試題
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
The main purpose of port State control is not to（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
The treatment of the fuel oils involves storage, heating, filtering and（）
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）