A.a spark plug
B.injectors
C.the heat of compression
D.increasing jacket water temperatures
您可能感興趣的試卷
你可能感興趣的試題
A.one automatic drain serving both containers
B.two air starting containers of approximately equal size
C.one control air container and one starting air container
D.one additional means of starting the main engine
A.prevent heat corrosion to internal components
B.increase fuel delivery rate and economy
C.prevent pre-ignition
D.avoid carbonization of the nozzle tips
A.loss of suction in the circulating pump
B.leak in the primary cooling system
C.broken raw water pump shaft
D.burned or cracked piston in one cylinder
A.avoid using liquid-cooled nozzles whenever possible
B.avoid low cooling water temperatures
C.avoid prolonged overloading of the engine
D.make certain the gasket seal between the nozzle and cylinder head is tight
A.centrifugal force rotates the ball-head
B.flyweight centrifugal force is balanced by spring force
C.flyweight centrifugal force is balanced by hydraulic pressure
D.speeder spring alone actuates the fuel control rod
最新試題
The cetane rating of diesel fuel is an indication of the （）
The shipboard oil pollution emergency plan will be invalid after （）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
If separating effect is not good, which measure should be taken （）
The ISPS Code consists of a mandatory section-Part A, which shows（）
Which of the following items don’t belong to dock repair works?（）
The condensers located in various stages of a flash evaporator are cooled by（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）