A.quantity of fuel injected is decreased
B.quantity of fuel injected will always be increased
C.start of injection is advanced
D.duration of injection will always be greater
您可能感興趣的試卷
你可能感興趣的試題
A.Over speed
B.fire improperly
C.lose oil pressure
D.overheatrapidly
A.torque limiter
B.over-speed trip
C.over-speed governor
D.load limit governor
A.fuel dribbling from leaking fuel injectors
B.burning fuel with a high carbon content
C.burning fuel with a high vanadium content
D.burning fuel with a lower sulphur content
A.high combustion temperature
B.high compression pressure
C.cracked cylinder liner
D.fuel with a high vanadium content
A.low combustion temperature
B.a leaking fuel nozzle check valve
C.late fuel injection
D.plugged oil-scraper ring hole
最新試題
The condensers located in various stages of a flash evaporator are cooled by（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
Flame failure in an automatically fired auxiliary boiler can from a/an （）
The main purpose of port State control is not to（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
Using a file without a handle may result in （）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）