A.low exhaust back pressure
B.early fuel injection in one of the cylinders
C.compression pressure in one of the cylinders
D.plugged injector holes
您可能感興趣的試卷
你可能感興趣的試題
A.cold intake air
B.excessive compression pressure
C.excessive cylinder lubrication
D.a light load
A.grinding the spare plunger to the barrel
B.replacing the plunger and the barrel
C.highly polishing both the plunger and barrel
D.replacing plunger only
A.Control the amount of lube oil burned in the combustion chamber
B.Transmit heat from the piston to the cylinder liner
C.Prevent damage to ring groove inserts by acting as a heat dam
D.Dissipate combustion chamber gas pressure by channeling it through the ring gap
A.transfer heat from the cylinder to the piston
B.scrape oil from the sides of the piston
C.seal the combustion space from the crankcases
D.prevent any piston contact with the cylinder liner
A.compression ratio of the engine
B.volume of the engine
C.relationships between pressure and volume during one stroke of the engine
D.relationships between pressure and volume during one cycle of the engine
最新試題
The main purpose of port State control is not to()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
If separating effect is not good, which measure should be taken ()
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
The condensers located in various stages of a flash evaporator are cooled by()
Diesel engine air start system check valves are opened by ()
The shipboard oil pollution emergency plan will be invalid after ()
Under MARPOL Code the ship to which it applies has to carry ()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()