A.lowering brine discharge density
B.decreasing the absolute pressure of each stage
C.increasing the saltwater feed heater temperature
D.increasing the pressure at the spray pipe
您可能感興趣的試卷
你可能感興趣的試題
A.Bedplate
B.Block
C.Base
D.Sump
A.clearance between the top of the valve stem and the rocker arm
B.compression of the valve springs
C.clearance between the valve seat inserts and the head
D.out of roundness of the fuel injection cams
A.low lube oil temperature
B.low lube oil pressure
C.high exhaust temperature
D.high cooling water pressure
A.Dirty lube oil filter
B.Too much piston ring wear
C.High lube oil viscosity
D.Low lube oil temperature
A.The oil oxidizes and forms carbon deposits
B.The viscosity increases
C.Engine oil consumption decreases
D.Lubricating qualities of the oil are enhanced
最新試題
If separating effect is not good, which measure should be taken （）
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
The shipboard oil pollution emergency plan will be invalid after （）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
Cold weather starting of a diesel engine may be made easier by（）
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?（）
Diesel engine air start system check valves are opened by （）