A.expansion space to leave in a tank
B.flash point at which the fuel will burn
C.temperature to which the fuel must be heated
D.rate at which the fuel can be pumped during transfer operations
您可能感興趣的試卷
你可能感興趣的試題
A.second stage feed heater
B.saltwater feed heater
C.distillate cooler
D.second stage vapor separator
A.spray pipes
B.demisters
C.condensers
D.splash baffles
A.deaerate the first effect distillate
B.filter the condensed flash vapors
C.deaerate the first and second effect distillate
D.remove small water droplets entrained in the flashed vapor
A.vacuum drag from the auxiliary condensate system
B.individual vacuum pumps
C.a single non-condensing air ejector
D.a two stage air ejector
A.vaporize, with the un-flashed water remaining at the temperature at which it entered the flash chamber
B.vaporize, with the un-flashed eater equalizing to the saturation conditions existing in the f lash chamber
C.vaporize, with the remaining water a t a temperature greater than it entered the flash chamber
D.boil, allowing steam bubbles to rise through the brine at the bottom of the flash chamber
最新試題
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
Diesel engine air start system check valves are opened by ()
The treatment of the fuel oils involves storage, heating, filtering and()
The main purpose of port State control is not to()
The ISPS Code consists of a mandatory section-Part A, which shows()
The condensers located in various stages of a flash evaporator are cooled by()
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
Flame failure in an automatically fired auxiliary boiler can from a/an ()
Cold weather starting of a diesel engine may be made easier by()
If two A.C.generators are to be operated in parallel, the load is distributed evenly by()