A.using a rotary grinder with an installed shield
B.letting go the anchor
C.handling wire rope or natural fiber line
D.painting with a spray gun
您可能感興趣的試卷
你可能感興趣的試題
A.should be coiled in a clockwise direction
B.should be coiled in a counterclockwise direction
C.may be coiled either clockwise or counterclockwise
D.should never be coiled
A.composite
B.left-lay
C.improved
D.preformed
A.Move bodily to port
B.Move bodily to starboard
C.Move in a zig-zag motion
D.Steer a fairly straight course
A.Abreast the heel
B.At right angles to the boom when viewed from above
C.Aft of the heel
D.Forward of the spiderband
A.Effect of the propeller flow on the rudders
B.Water flow due to the vessel's movement through the water
C.Tunnel affect of the water flow past opposing rudders
D.Discharge current being channeled to impinge on the vessel's deadwood
最新試題
In the manufacture of wire rope，if the wires are shaped to conform to the curvature of the finished rope before they are laid up，the rope is called（）.
As you hold a piece of manila line vertically in front of you，the strands run from the lower left to the upper right.Which type of line is this（）.
Serving is（）.
Which statement about stowing spare hose is TRUE（）.
The best method of protecting that portion of a fiber anchor line nearest the anchor from chafing on the bottom is by（）.
When a davit-launched raft is lowered from a ship，upon becoming waterborne，the raft is released by（）.
What best describes an anchor buoy（）.
The Vessel is a（）bulk carrier which is permitted to carry grain in bulk without requiring any fittings under the Rules of the 1974 International Safety of Life at Sea Convention.
In a married falls rig at the after end of a hatch，a boom is rigged in a fore and aft line through its heel.Stresses on the outboard guy will be LEAST if the guy is made fast at a point（）.
At least（）radar transponder shall be carried on each side of every cargo ship of 500 gross tonnage and upwards.