A.high average exhaust manifold
B.greatly fluctuating inlet manifold pressure
C.constant exhaust manifold pressure
D.multiple exhaust pipes to the turbocharger
您可能感興趣的試卷
你可能感興趣的試題
A.lower thermal expansion rates than wet liners
B.greater heat transfer rate than wet liners
C.greater wear resistance than wet liners
D.procedure to replace dry liners is simpler than for wet liners
A.exhaust gas pressure
B.exhaust gas temperature
C.speed
D.load
A.Viscosity is decreased
B.Octane number is altered
C.Pump speed is decreased
D.Blower’s speed is decreased
A.of the thin wall thickness
B.honing makes it easier to maintain the desired oil ilm
C.water seals are not required
D.it fits more loosely due to a decrease in heat transfer through the composite wall
A.Constant pressure
B.Pulse
C.constant velocity
D.Axial flow
最新試題
The shipboard oil pollution emergency plan will be invalid after （）
Using a file without a handle may result in （）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
Flame failure in an automatically fired auxiliary boiler can from a/an （）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
The treatment of the fuel oils involves storage, heating, filtering and（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）