A.greater than the average exhaust manifold pressure
B.less than the average exhaust manifold pressure
C.greater at the turbine wheel than at the impeller
D.greater at reduced engine speed
您可能感興趣的試卷
你可能感興趣的試題
A.loss of additives from the lube oil
B.carbon deposits in the lube oil
C.excessive centrifuging
D.excessive fuel dilution
A.erosion and cratering of the nozzle orifices
B.fuel leakage into the nozzle drain line
C.fuel leakage before and after injection
D.insufficient fuel delivery though that nozzle
A.check cylinder lubrication
B.connect the pressure indicator pressure
C.test cylinder heads
D.connect the exhaust gas pyrometers
A.At zero load the intake manifold pressure is greater than the exhaust manifold pressure
B.At full load the intake manifold pressure and exhaust manifold pressure are equal
C.At full load the intake manifold pressure is less than the exhaust manifold pressure
D.At full load the intake manifold pressure is greater than the exhaust manifold pressure
A.increasing cooling water flow
B.increasing lube oil flow
C.dilution by fuel oil
D.adding SAE 70 oil
最新試題
Which of the following items don’t belong to dock repair works?()
The cetane rating of diesel fuel is an indication of the ()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
The main purpose of port State control is not to()
() is not installed on the main switchboar.
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?()