A.dilutes the lube oil and reduces its viscosity
B.forms sulfuric acid in the lube oil
C.causes pitting and failure of the bearings
D.causes sludge deposits on valve stems
您可能感興趣的試卷
你可能感興趣的試題
A.To provide accessibility to the cylinder liners
B.To add stability to the engine block
C.To add rigidity to the block and a surface for attaching other parts
D.To make a surface for the base
A.temperature of the exhaust gases
B.energy supplied to the turbocharger
C.air pressure to the intake manifold
D.purge of exhausted gases from the cylinders
A.increase in engine speed
B.increase in cylinder turbulence
C.leaking needle valve
D.reduction in cylinder turbulence
A.check the air filter for dirt
B.check for an exhaust leak
C.check the cooling water temperature
D.notify the bridge that you are going to shut the engine down
A.formation of carbon on the intake and exhaust ports
B.high water jacket temperatures
C.overheated pistons and cylinders
D.an increase in lube oil viscosity due to fuel dilution
最新試題
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
() is not installed on the main switchboar.
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
If separating effect is not good, which measure should be taken ()
The condensers located in various stages of a flash evaporator are cooled by()
The ISPS Code consists of a mandatory section-Part A, which shows()
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
()are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()