A.reciprocating motion of exhaust valves
B.rotary motion of the camshaft
C.reciprocating motion of the piston
D.developed differential
您可能感興趣的試卷
你可能感興趣的試題
A.dilutes the lube oil and reduces its viscosity
B.forms sulfuric acid in the lube oil
C.causes pitting and failure of the bearings
D.causes sludge deposits on valve stems
A.To provide accessibility to the cylinder liners
B.To add stability to the engine block
C.To add rigidity to the block and a surface for attaching other parts
D.To make a surface for the base
A.temperature of the exhaust gases
B.energy supplied to the turbocharger
C.air pressure to the intake manifold
D.purge of exhausted gases from the cylinders
A.increase in engine speed
B.increase in cylinder turbulence
C.leaking needle valve
D.reduction in cylinder turbulence
A.check the air filter for dirt
B.check for an exhaust leak
C.check the cooling water temperature
D.notify the bridge that you are going to shut the engine down
最新試題
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
Flame failure in an automatically fired auxiliary boiler can from a/an （）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
Using a file without a handle may result in （）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
（） is not installed on the main switchboar.