A.loss of power
B.misfiring
C.low fuel oil pressure
D.All of the above
您可能感興趣的試卷
你可能感興趣的試題
A.Increase the cooling water flow to the engine
B.Secure or reduce fuel to that cylinder
C.Screw down on the pressure adjusting spring to decrease to decrease popping pressure
D.Readjust the injection timing
A.The greater the atomization, the greater the penetration
B.The greater the atomization, the less the penetration
C.The degree of atomization has nothing to do with the degree of penetration
D.Atomization and penetration are one and the same
A.Move the fuel control mechanism to the no fuel position
B.Block the fuel supply by closing the master fuel valve
C.Shut off the fuel supply and block the flow of intake air
D.Relieve all pressure in the fuel system
A.airification
B.vaporization
C.atomization
D.gasification
A.reciprocating motion of exhaust valves
B.rotary motion of the camshaft
C.reciprocating motion of the piston
D.developed differential
最新試題
Flame failure in an automatically fired auxiliary boiler can from a/an （）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
The ISPS Code consists of a mandatory section-Part A, which shows（）
The shipboard oil pollution emergency plan will be invalid after （）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）