A.Excessive piston blow-by to the manifold
B.Insufficient cooling water flow
C.Accumulated water in the air boxes
D.Clogged air intake filters
您可能感興趣的試卷
你可能感興趣的試題
A.cause blow-by
B.chemically attack the piston skirt
C.form an emulsion of lube oil and water
D.raise the piston temperature
A.An increased air temperature differential between the cooler inlet and outlet
B.A decrease in the air pressure differential across the cooler
C.Excessive condensate forming in the air box
D.A decrease in the air temperature differential between the cooler inlet and outlet
A.lube oil pumping
B.rotating rings
C.gas pressure behind the ring
D.passage of hot gases
A.insufficient lubrication
B.improper piston cooling
C.blow-by
D.overload operation
A.has a crown-face
B.exceeds wear limits through normal wear
C.has excessive blow-by
D.is in good condition
最新試題
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?（）
The ISPS Code consists of a mandatory section-Part A, which shows（）
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）
The condensers located in various stages of a flash evaporator are cooled by（）
Cold weather starting of a diesel engine may be made easier by（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）