A.low exhaust back pressure
B.high lube oil temperature
C.insufficient cranking speed
D.excessive fuel atomization
您可能感興趣的試卷
你可能感興趣的試題
A.changing the direction of exhaust gas flow
B.increasing the exhaust gas velocity
C.changing the exhaust gas weight
D.increasing the exhaust gas static pressure
A.high lube oil temperature
B.low lube oil temperature
C.excessive cylinder cooling
D.high air injection pressure
A.increased engine back pressure
B.sulfuric acid corrosion
C.surface pitting of the turbocharger
D.moisture impingement on the turbocharger compressor blade
A.cylinder exhaust ports
B.injection line
C.cylinder indicator cock
D.banjo oiler line
A.reducing exhaust gas velocity
B.increasing the frequency of gas vibration
C.the use of long head pipes
D.the use of zinc electrodes
最新試題
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
If separating effect is not good, which measure should be taken （）
Using a file without a handle may result in （）
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?（）
The cetane rating of diesel fuel is an indication of the （）
The main purpose of port State control is not to（）
Diesel engine air start system check valves are opened by （）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
The ISPS Code consists of a mandatory section-Part A, which shows（）