A.governor droop
B.speeder spring tension
C.fuel rack lag
D.load on the engine
您可能感興趣的試卷
你可能感興趣的試題
A.a cracked cylinder liner
B.clogged intake ports
C.broken piston rings
D.a faulty head gasket
A.increase the starting air pressure
B.use a higher than normal cranking speed
C.increase the fuel injection pressure
D.use a fuel having a lower ignition temperature
A.soft water pump was not secured along with the engine
B.jacket water thermostat has failed
C.cylinder liner may be cracked
D.raw water pump is over-speeding just prior to engine shutdown
A.excessive fuel pressure
B.high lube oil viscosity
C.inadequate fuel injection
D.excessive starting air pressure
A.proper break-in wear
B.improper break-in wear
C.relocation of the overlay flashing
D.water contamination of the lube oil system
最新試題
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
Under MARPOL Code the ship to which it applies has to carry ()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
The cetane rating of diesel fuel is an indication of the ()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
The treatment of the fuel oils involves storage, heating, filtering and()
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()