A.fuel lines
B.lube oil filter
C.crank case pump
D.rocker arm reservoir
您可能感興趣的試卷
你可能感興趣的試題
A.turn engine with jacking gear
B.drain filters and strainers and bleed off water at each injection pump
C.use ether to start the engine with blow-down valves open
D.blow through the cylinders and fuel lines with a drying agent
A.Compression ratio
B.Fuel/Air ratio
C.Compression pressure
D.Lube oil pressure
A.test the starting system
B.remove condensation from the cylinders
C.check the compression
D.check for proper lube oil pressure
A.turn the flywheel
B.reduce friction
C.overcome inertia
D.ignite the fuel
A.lower compression pressures
B.overheating without smoking
C.failure to start
D.a run away without load
最新試題
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
The cetane rating of diesel fuel is an indication of the （）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
If separating effect is not good, which measure should be taken （）
Cold weather starting of a diesel engine may be made easier by（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
The main purpose of port State control is not to（）
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）