A.fuel control rack had admitted excessive fuel
B.engine speed does not match the fuel rack setting
C.engine has failed to reach its firing speed
D.starter pinion and ring gear contact is not correct
您可能感興趣的試卷
你可能感興趣的試題
A.an obstruction in an cylinder
B.water accumulation in some engine cylinders
C.low starting air pressure
D.low scavenge air pressure
A.proper fuel injection
B.water in the fuel
C.incomplete combustion
D.burning of lube oil
A.an insufficient speed droop setting
B.an overloaded engine
C.clogged drain holes in the oil control rings
D.complete combustion
A.late ignition
B.water in the fuel
C.high compression temperature
D.starting valve stuck open
A.White
B.Black
C.Blue
D.Clear
最新試題
Flame failure in an automatically fired auxiliary boiler can from a/an （）
Diesel engine air start system check valves are opened by （）
（） is not installed on the main switchboar.
The condensers located in various stages of a flash evaporator are cooled by（）
The ISPS Code consists of a mandatory section-Part A, which shows（）
To proceed to the assistance of a ship in distress is（）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
Under MARPOL Code the ship to which it applies has to carry （）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）