A.a burned out solenoid in the oil supply valve
B.high temperature excess air
C.incorrectly setting the hot-well dump valve
D.an incorrectly positioned burner snubber realy
您可能感興趣的試卷
你可能感興趣的試題
A.clean the flame scanner photocell window
B.Inspect and clean all solenoid valves
C.lift the safety valves by hand
D.Inspect for oil or water leaks
A.cold fuel oil
B.low fuel oil pressure
C.low atomizing steam pressure
D.water in the fuel oil
A.adding hydrazine
B.blowing down the boiler
C.adding phenolphthalein
D.adding a sulfite chloride scavenger
A.increase exhaust gas velocity through the boiler
B.reduce accumulations of carbon deposits on the heat transfer surfaces
C.eliminate exhaust gas pulsations and noise
D.increase the rate of heat transfer to the waterside
A.soap hardness
B.nitrog encontent
C.chloride content
D.dissolved CO2
最新試題
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
The main purpose of port State control is not to（）
If separating effect is not good, which measure should be taken （）
Cold weather starting of a diesel engine may be made easier by（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
The condensers located in various stages of a flash evaporator are cooled by（）
Using a file without a handle may result in （）