A.cleaning fuel oil, lubricating oil and seawater filter
B.reducing fuel feeding of the main engine appropriately or reducing the pitch angle of propeller
C.using low sea chest
D.closing the skylight and the ventilation opening, which doesn’t affect the normal work of equipments
您可能感興趣的試卷
你可能感興趣的試題
A.navigating with a low diesel engine speed
B.navigating with a stable diesel engine speed
C.increasing the efficiency of propeller
D.increasing fuel injection
A.prevent the diesel engine surging
B.prevent governor from being damaged because of swing
C.reduce the probability of the crank shaft being torsional vibrated and resonated
D.prevent the main engine being overload or overspeed
A.the power of main engine will be reduced
B.exhaust temperature will be increased
C.the speed of the ship will be reduced
D.the propulsion characteristic of propeller will keep unchanged
A.reduce fuel feeding
B.increase fuel feeding
C.keep original fuel feeding
D.be overspeed
A.overspeed；overload
B.overload；overspeed
C.over torque；overspeed
D.low mechanical efficiency；overload
最新試題
The condensers located in various stages of a flash evaporator are cooled by（）
Which of the following items don’t belong to dock repair works?（）
The main purpose of port State control is not to（）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）