A.fuel valve
B.the starting air valve
C.the sea chest
D.the main sea pump inlet valve
您可能感興趣的試卷
你可能感興趣的試題
A.shut off the starting air receiver outlet valve
B.stop the FO priming transfer pump and shut off the correspondence inlet and outlet valve
C.stop the SW pump immediately and shut off the correspondence inlet and outlet valve
D.stop the FW pump immediately and shut off the correspondence inlet and outlet valve
A.overload
B.the odds of the load
C.the default of parts
D.overload and the odds of the load
A.testing for the mechanical load and the thermal load
B.inspecting thermal and mechanical condition of the engine
C.inspecting each system and exhaust temperature
D.testing for compress pressure and explosion pressure
A.the highest
B.above 3/4
C.1/2-3/4
D.the lowest
A.achromatism or thin gray
B.thin white
C.sky-blue
D.black
最新試題
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
The condensers located in various stages of a flash evaporator are cooled by（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
（） is not installed on the main switchboar.
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
The main purpose of port State control is not to（）
Flame failure in an automatically fired auxiliary boiler can from a/an （）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）