A.Cooling water is alkalescence
B.cooling water is acidity
C.cooling water has salinity
D.cooling water has impurity
您可能感興趣的試卷
你可能感興趣的試題
A.alkale scence
B.acidity
C.salinity
D.impurity
A.stop the LO pump, SW pump, FW pump
B.stop the priming FO transfer pump
C.engage the turning gear
D.open the scavenge air belts drain valve and cover the turbocharger silencer with the dustproof cover
A.keep all systems in normally running
B.the main engine is stand-by
C.shut off the starting air bottle outlet valve
D.pay attention to the changes of the system parameters
A.fuel valve
B.the starting air valve
C.the sea chest
D.the main sea pump inlet valve
A.shut off the starting air receiver outlet valve
B.stop the FO priming transfer pump and shut off the correspondence inlet and outlet valve
C.stop the SW pump immediately and shut off the correspondence inlet and outlet valve
D.stop the FW pump immediately and shut off the correspondence inlet and outlet valve
最新試題
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
Using a file without a handle may result in （）
The condensers located in various stages of a flash evaporator are cooled by（）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
Under MARPOL Code the ship to which it applies has to carry （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
The treatment of the fuel oils involves storage, heating, filtering and（）