A.Bending moments
B.Initial stability
C.Draft
D.Trim
您可能感興趣的試卷
你可能感興趣的試題
A.LCF and LCB
B.LCG and LCB
C.metacenter and LCG
D.VCG and LCG
A.necessary to change the angle of list 1°at a given draft
B.necessary to change trim 1 cm at a given draft
C.pressure per square cm on the vessel's hull at a given draft
D.necessary to further immerse the vessel 1 cm at a given draft
A.align the vessel's tailshaft
B.determine the vessel's trim
C.determine the vessel's freeboard
D.locate the vessel's centerline
A.list
B.heel
C.trim
D.flotation
A.list
B.heel
C.trim
D.flotation
最新試題
The ship should have a slightly deeper draft（）.
An unstable upright equilibrium position on a vessel means that the metacenter is（）.
What should you apply to a fathometer reading to determine the depth of water?（）
What DOCS SALT WATER DRAFT means?（）.
What is NOT an advantage of the house-fall system when compared to a married-fall system using two of the ship’s booms? （）
Load line regulations are designed to insure that a vessel has adequate structural strength and sufficient（）.
The total weight of cargo，fuel，water，stores，passengers and crew，and their effects，that a ship can carry，is the（）.
From（）the information concerning the tons per inch or centimeter immersion of a vessel shall be usually found.
The term length of a vessel in International Regulations for Preventing Collision at Sea 1972 means（）.
Aboard a vessel，multiplying a load’s weight by the distance of the load’s center of gravity from the centerline results in the load’s（）.