A.check valve installed in the line
B.shut off valve at a manifold near the pump
C.quick disconnect union within ten feet of the pump
D.regulator in the line set at 125 psi
您可能感興趣的試卷
你可能感興趣的試題
A.Foam
B.Solid stream water nozzle
C.All-purpose nozzle
D.Carbon dioxide
A.over the top of the flames
B.off a bulkhead into the fire
C.in front of the fire
D.at the base of the fire
A.base of the flames,moving the horn from side to side,following the flames upward as they diminish
B.top of the flaming area,moving the horn from side to side,following the flames downward as they diminish
C.center of the flaming area,moving the horn vertically from top to bottom
D.bottom of the flaming area,moving the horn vertically to the top following the flames upward as they diminish
A.protect themselves from smoke
B.obtain the best available air
C.allow the heat and steam to pass overhead
D.All of the above
A.aimed at the source of the flames
B.fogged above the equipment
C.shot off a flat surface onto the flames
D.used to shield against electrical shock
最新試題
Which extinguishing agent is recommended in the Chemical Data Guide for use on a carbon disulfide fire?()
When must a dry chemical fire extinguisher be recharged?()
Which action is routinely performed at the annual servicing and inspection of a dry-chemical cartridge-operated portable fire extinguisher?()
Which precaution should be taken when testing a line throwing gun?()
Which extinguishing agent is NOT recommended in the Chemical Data Guide for use on a cyclohexane fire?()
Which extinguishing agent is best for use on a magnesium fire?()
When loading or discharging dry mud or cement,crew members should use facial respirator masks and().
When using a high-velocity fog stream in a passageway,the possibility of a blow back must be guarded against. Blow back is most likely to occur when().
When should a fire be ventilated?()
Which extinguishing agent is the best for use on electrical fires?()