A.protocol
B.VLAN number
C.TCP or UDP port numbers
D.source switch port number
E.source IP address and destination IP address
F.source MAC address and destination MAC address
您可能感興趣的試卷
你可能感興趣的試題
A.BSS
B.ESS
C.IBSS
D.SSID
A.Because of damaged flash memory， the router will fail the POST
B.It will attempt to locate the IOS from a TFTP server. If this fails， it will initiate the setup dialog.
C.It will attempt to locate the IOS from a TFTP server. If this fails， it will load a limited IOS from ROM
D.It will attempt to locate the configuration file from a TFTP server. If this fails， it will initiate the setup dialog.
E.It will attempt to locate the configuration file from a TFTP server. If this fails， it will load a limited configuration from ROM
A.the summarized address for all of the internal subnetted addresses
B.the MAC address of the router used by inside hosts to connect to the Internet
C.a globally unique， private IP address assigned to a host on the inside network
D.a registered address that represents an inside host to an outside network
A.VTP allows routing between VLANs.
B.VTP allows a single port to carry information to more than one VLAN
C.VTP allows physically redundant links while preventing switching loops.
D.VTP allows switches to share VLAN configuration information.
A.point-to-point and multiaccess
B.point-to-multipoint and multiaccess
C.point-to-point and point-to-multipoint
D.nonbroadcast and broadcast multipoint
E.nonbroadcast and broadcast multiaccess
最新試題
What is the result of issuing the frame-relay map ip 192.168.1.2 202 broadcast command?（）
Which cisco ios command can help to determine the timing of various debug events,relative to each other,when you are debugging a complicated router issue?（）
Which encapsulation type is a Frame Relay encapsulation type that is supported by Cisco routers?（）
Which pairing reflects a correct protocol-and-metric relationship?（）
Which Cisco IOS diagnostics command can disrupt the operation of a router under high-load conditions?（）
Which statement is true, as relates to classful or classless routing?（）
The network administrator cannot to switch 1 over a telnet session,although the hosts attached to switch 1 can ping the interface Fa0/0 of the router.Given the information in the graphic and assuming that the router and switch2 are configured properly,which of the following commands should be issued on switch 1 to correct this problem?（）
A network administrator needs to configure a serial link between the main office and a remote location.The router at the remote office is a non-cisco router. How should the network administrator configure the serial interface of the main office router to make the connection?（）
Which command is used to display the collection of OSPF link states?（）
While troubleshooting a network problem,a technician discovers that the current copy of the Cisco IOS is outdated and needs to be updated.Which of the following commands would the technician issue to replace the Cisco router IOS with the newer version?（）