單項選擇題Which type of cable is used to connect the COM port of a host to the COM port of a router or switch?()

A. crossover
B. straight-through
C. rolled
D. shielded twisted-pair


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題Which Cisco Catalyst feature automatically disables the port in an operational PortFast upon receipt of a BPDU?()

A. BackboneFast
B. UplinkFast
C. Root Guard
D. BPDU Guard
E. BPDU Filter

2.單項選擇題How many bits are contained in each field of an IPv6 address?()

A. 24
B. 4
C. 8
D. 16

3.單項選擇題For which type of connection should a straight-through cable be used?()

A. switch to switch
B. switch to hub
C. switch to router
D. hub to hub
E. router to PC

4.單項選擇題A system administrator installed a new switch using a script to configure it. IP connectivity was tested using pings to SwitchB. Later attempts to access NewSwitch using Telnet from SwitchA failed. Which statement is true?()

A. Executing password recovery is required.
B. The virtual terminal lines are misconfigured.
C. Use Telnet to connect to RouterA and then to NewSwitch to correct the error.
D. Power cycle of NewSwitch will return it to a default configuration.

5.單項選擇題A host is attempting to send data to another host on a different network. What is the first action that the sending host will take?()

A. Drop the data.
B. Send the data frames to the default gateway.
C. Create an ARP request to get a MAC address for the receiving host.
D. Send a TCP SYN and wait for the SYN ACK with the IP address of the receiving host.

最新試題

You have been asked to come up with a subnet mask that will allow all three web servers to be on the same network while providing the max number of subnets.Which network address and subnet mask meet this requirement?()

題型:?jiǎn)雾?xiàng)選擇題

A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem?()Router(config)#router ospf 1Router(config-router)#network 10.0.0.0 255.0.0.0 area 0

題型:?jiǎn)雾?xiàng)選擇題

Which command displays the CHAP authentication process as it occurs between two routers?()

題型:?jiǎn)雾?xiàng)選擇題

Which command is used to display the collection of OSPF link states?()

題型:?jiǎn)雾?xiàng)選擇題

An administrator must assign static IP addresses to the servers in a network.For network 192.168.20.24/29, the router is assigned the first usable host address while the sales server is given the last usable host address. Which of the following should be entered into the IP propertied box for the sales server?()

題型:?jiǎn)雾?xiàng)選擇題

Which IPsec security protocol should be used when confidentiality is required?()

題型:?jiǎn)雾?xiàng)選擇題

Which encapsulation type is a Frame Relay encapsulation type that is supported by Cisco routers?()

題型:?jiǎn)雾?xiàng)選擇題

What is the subnetwork address for a host with the IP address 201.100.5.68/28?()

題型:?jiǎn)雾?xiàng)選擇題

An employee of ABC company has move to an office on a different floor. Although the administrator is able to telnet to all of the routers,the address of Switch F is needed in order to verify that the employee remains in the same VLAN.Which action could be used by the administrator to find the IP address of Switch F?()

題型:?jiǎn)雾?xiàng)選擇題

Which device might be installed at a branch office to enable and manage an IPsec site-to-site VPN?()

題型:?jiǎn)雾?xiàng)選擇題