單項選擇題A network administrator wants to add a line to an access list that will block only Telnet access by the hosts on subnet 192.168.1.128/28 to the server at 192.168.1.5. What command should be issued to accomplish this task?()

A. access-list 101 deny tcp 192.168.1.128 0.0.015 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any any
B. access-list 1 deny tcp 192.168.1.128 0.0.0.15 host 192.168.1.5 eq 23 access-list 1 permit ip any any
C. access-list 1 deny tcp 192.168.1.128 0.0.0.255 192.168.1.5 0.0.0.0 eq 21 access-list 1 permit ip any any
D. access-list 101 deny tcp 192.168.1.128 0.0.0.240 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any any
E. access-list 101 deny ip 192.168.1.128 0.0.0.240 192.158.1.5 0.0.0.0 eq 23 access-list 101 permit ip any any
F. access-list 101 deny ip 192.168.1.128 0.0.0.15 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any any


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題What are some general guidelines regarding the placement of access control lists?()

A. You should place standard ACLS as close as possible to the source of traffic to be denied.
B. You should place extended ACLS as close as possible to the source of traffic to be denied.
C. You should place standard ACLS as close as possible to the destination of traffic to be denied.
D. You should place extended ACLS should be places as close as possible to the destination of traffic to be denied.

2.單項選擇題Which of the following commands would successfully implement an access list on a routers virtual terminal line?()

A. RouterTK(config-line)# access-class 10 in
B. RouterTK(config-if)# ip access-class 23 out
C. RouterTK(config-line)# access-list 150 in
D. RouterTK(config-if)# ip access-list 128 out
E. RouterTK(config-line)# access-group 15 out
F. RouterTK(config-if)# ip access-group 110 in

3.單項選擇題

Study the information and the relevant configuration file below for the Testking Branch router
What additional command must be executed on the Branch router before interesting traffic will initiate an ISDN call?()

A. (config-if)# dialer-group 1
B. (config-if)# dialer-list 1
C. (config-if)# dialer map 1
D. (config-if)# dialer-route 1

4.單項選擇題

The following access list below was applied outbound on the E0 interface connected to the 192.169.1.8/29 LAN:How will the above access lists affect traffic?()

A. FTP traffic from 192.169.1.22 will be denied.
B. No traffic, except for FTP traffic will be allowed to exit E0.
C. FTP traffic from 192.169.1.9 to any host will be denied.
D. All traffic exiting E0 will be denied.
E. All FTP traffic to network 192.169.1.9/29 will be denied.

最新試題

Which characteristics are representative of a link-state routing protocol?()

題型:多項選擇題

Identify three valid host addresses in the 192.168.27.0 network with a subnet mask of 255.255.255.240. ()

題型:多項選擇題

An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? ()

題型:多項選擇題

A technician at TestKing needs to update the network documentation. One of the tasks includes documenting the name of the IOS image file of each router in the network.Which commands could be used to find this information?()

題型:單項選擇題

What is the purpose of typing o/r 0x2142 during a password recover procedure on a 2500 series router?()

題型:單項選擇題

You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?()

題型:多項選擇題

A network host is configured as follows: Host IP address: 192.168.16.183 Subnet mask: 255.255.255.224 Default gateway: 192.168.16.190 Which of the following statements describe the network to which this host is attached?()

題型:多項選擇題

A Class C network address has been subnetted with a /27 mask.Which of the following addresses is a broadcast address for one of the resulting subnets?()

題型:單項選擇題

What is the purpose of pressing the Ctrl+Break keys during the router password recover procedure?()

題型:單項選擇題

What is a global command?()

題型:單項選擇題