單項選擇題For specific reason, the Owner may transfer the classification member of the vessel to another classification member which is covered by the IACS ‘Transfer of Class Agreement’. Which of the requirements listed below is disobey the IACS “Transfer of Class Agreement?()

A、For all ships between 5 to 10 years of age a representative number of ballast spaces are to be examined.
B、For all ships between 10 to 20 years of age a representative number of cargo spaces are to be examined.
C、For all ships 15 years of age and over all overdue surveys and conditions of class completed by the gaining class society before the transfer of class can take place. 
D、For all ships which are 20 years of age and above or ships subject to ESP which are 15 years of age and above, a full Special Survey or Intermediate Survey, including docking, will be carried out.


您可能感興趣的試卷

你可能感興趣的試題

2.單項選擇題Under regulation 6(2) of MARPOL Annex VI, ships constructed before 19 May 2005 shall be issued with the IAPP Certificate no later than the first scheduled dry docking after 19 May 2005, but in no case later than 19 May 2008. Ships flying the flag of a State which is not a Party to MARPOL Annex VI and which do not carry an IAPP Certificate after the above dates should be treated in accordance with chapter 3 of these Guidelines. Which deficiency listed below may not cause the detention of the vessel by PSC inspection?()

A、Absence of valid IAPP Certificate, EIAPP Certificates or Technical Files
B、A diesel engine, with a power output of more than 130 kW, which is installed on board a ship constructed on or after 1 January 2000, or a diesel engine having undergone a major conversion on or after 1 January 2000, which does not comply with the NOx Technical Code
C、the sulphur content of any fuel oil being used on board exceeds 4.5% m/m
D、An incinerator installed on board the ship before 1 January 2000 does not comply with requirements contained in appendix IV to the Annex, or the standard specifications for shipboard incinerators developed by the Organization (resolutions MEPC.76(40) and MEPC.93(45))

3.單項選擇題Which method listed below is acceptable by classification society to perform hose testing to weather tight hatch covers and closing appliances()

A、This is to be carried out at a maximum distance of 1,5m with a hose pressure not less than 2,0 kgf/cm2. The nozzle diameter is not to be less than 12mm.
B、This is to be carried out at a maximum distance of 1,5m with a hose pressure not less than 3,5 kgf/cm2. The nozzle diameter is not to be less than 5mm.
C、This is to be carried out at a maximum distance of 1,5m with a hose pressure not less than 4,0 kgf/cm2. The nozzle diameter is not to be less than 8mm.
D、This is to be carried out at a maximum distance of 2,0m with a hose pressure not less than 2,0 kgf/cm2. The nozzle diameter is not to be less than 12mm.

4.單項選擇題A safety management system that satisfies the requirements of the ISM Code is a system of prevention designed to prevent pollution and improve safety. The safety management system shall include the following functional requirements, please find out the non applicable function().

A、A safety and environmental protection policy;
B、Instructions and procedures to ensure safety operation of ships and protection of the environment in compliance with relevant international and flag state legislation
C、Provide a guarantee that there will never be another accident or technical defect
D、Defined levels of authority and lines of communication between and amongst, shore and shipboard personnel

5.單項選擇題Which narrative regarding loading software is incorrect?()

A、The approved Loading Program could substituted the approved Loading Manual and/or Trim and Stability Booklet
B、A Loading Program is required to have General Approval by classification Society prior to being considered for use on a specific ship
C、Following a satisfactory installation test on board the ship the Surveyor will issue a Program Installation Test
D、A Loading Program may be provided as a classification requirement or as an Owner’s option

最新試題

對某營運集裝箱船進行船上救生衣檢查,應如何進行()

題型:多項選擇題

以下關于主和應急電源及主和應急配電板的描述或設計,哪些是與SOLAS要求不相符的()

題型:多項選擇題

周期性無人值班機器處所應設有報警系統已指示任何需要注意的故障,此報警系統應滿足什么要求?

題型:問答題

服務于機艙的動力通風系統的停止控制裝置有哪些要求?

題型:問答題

國際防止油污證書(COP)初次檢驗時,下述對15ppm艙底水報警裝置可操作性及核查其有效性描述正確的是()

題型:多項選擇題

對于配備分流系統的油船,在進行防止油類污染檢驗時應核查分流系統的操作須知,該須知可包含在船舶下列哪些文件中()

題型:多項選擇題

救生艇筏、救助艇降落設備和承載釋放裝置的定期檢修的要求是哪些()

題型:多項選擇題

某驗船師在對一艘5000總噸的國際航行貨船進行特別檢驗時,發現船舶實際狀況與圖紙不符合,在原艇甲板后部多出一個全封閉的甲板室。船員解釋該房間是新加裝作為物料間使用的,驗船師遂要求重新修改該船噸位數據,請問下述有關船舶噸位的哪些陳述是錯誤的()

題型:多項選擇題

為預防觸電、電氣火災及其他電氣災害,對主配電板和應急配電板的布置有何要求?

題型:問答題

在對一艘國際航行的32000總噸的油輪進行鍋爐檢驗時,驗船師發現燃油鍋爐僅一個鍋爐安全閥工作正常,鍋爐蒸汽高低壓控制及自動給水系統運行正常,但其余各項報警和安全功能未能處于正常狀態,該輪設有柴油機動力推進系統,具有機艙A.UT-0附加標志。船東認為鍋爐設備已滿足安全航行的要求,但驗船師根據SOLAS公約的規定,要求船東必須對下列哪些安保功能進行修復,才能簽署證書()

題型:多項選擇題