A.fuel oil pump will over-speed if dirt is not removed
B.fuel oil transfer pumps cannot tolerate small amounts of dirt in the oil
C.fuel injectors may be damaged by foreign particles in the fuel oil
D.dirty fuel will clog the intake air filter
您可能感興趣的試卷
你可能感興趣的試題
A.low lube oil temperature
B.high ambient air temperature
C.low tube oil pressure
D.high exhaust system back pressure
A.the type and size of the engine
B.the condition of the engine
C.ambient temperature
D.all of the above
A.it has a longer power stroke
B.more air gets into the cylinder each stroke
C.it develops twice as many power strokes at the same speed
D.higher combustion pressure is developed
A.viscosity is too low
B.temperature is too low
C.pump discharge pressure is higher than the systems pressure
D.pump capacity is greater than the systems needs
A.they must be located at the after end of the engine
B.they can only be used with one engine at a time
C.they eliminate the need for controllable pitch propellers
D.they are connected to the engine with a flexible coupling
最新試題
The minimum speed an engine must attain before ignition can occur depends upon （）.
White smoke exhausting from an operating diesel engine may indicate （）.
Maximum horsepower of a diesel engine is attained （）.
The most important factor in engine performance is the actual power output at the end of the crankshaft available for doing workThis is known as （）.
A thrust bearing is used with a propulsion diesel engine to （）.
In diesel engines, the four basic events (intake, compression, power and exhaust) are performed once in （）.
How many power strokes per crankshaft revolution are there in an eight cylinder, two stroke/cycle diesel engine?（）
To determine if the lube oil filter elements need changing, （）.
When would the available energy of the exhaust gases of a two-stroke/cycle diesel engine be insufficient to drive an exhaust gas turbocharger, resulting in the incorrect amount of air for combustion?（）
In using reduction gears to obtain efficient propeller speeds, （）.