A.viscosity is too low
B.temperature is too low
C.pump discharge pressure is higher than the systems pressure
D.pump capacity is greater than the systems needs
您可能感興趣的試卷
你可能感興趣的試題
A.they must be located at the after end of the engine
B.they can only be used with one engine at a time
C.they eliminate the need for controllable pitch propellers
D.they are connected to the engine with a flexible coupling
A.excessive fuel penetration
B.prolonged injection lag
C.reduced ignition lag
D.prolonged ignition lag
A.control axial movement of the crankshaft
B.transmit engine thrust to the propeller shaft
C.absorb vibrations in the propeller shafting
D.prevent propeller thrust from being transmitted to the hul
A.wheelhouse control station
B.engine room control station
C.captains office
D.chief engineers office
A.a shortened ignition delay period
B.a lean fuel/air mixture
C.excess fuel in the combustion chamber
D.rapid vaporization of injected fuel droplets
最新試題
Control of the main propulsion diesel engines can be shifted from the engine room to the wheelhouse from the ().
Lube oil cannot be efficiently filtered if its ().
In using reduction gears to obtain efficient propeller speeds, ().
The highest pressure in a diesel engine cylinder normally occurs ().
An automated diesel engine should normally shut down due to ()
A thrust bearing is used with a propulsion diesel engine to ().
If the main engine of an unattended engine room shuts down automatically, it will be indicated by an alarm ().
Engine protection by means of an alarm or shutdown control can be obtained with devices that are sensitive to ().
Electrically operated safety devices on auxiliary diesel engines function to stop the engine by ().
Lube oil filters remove contaminants more efficiently if the oil being filtered is ().