A.stays
B.winches
C.barrels
D.brakes
您可能感興趣的試卷
你可能感興趣的試題
A.fire-tubes
B.furnaces
C.water drums
D.water wall tubes
A.The three moving vanes and the three fixed vanes form three pressure chambers
B.The three moving vanes and the three fixed vanes form six pressure chambers
C.The three moving vanes and the three fixed vanes form nine pressure chambers
D.The three moving vanes and the three fixed vanes form twelve pressure chambers
A.It is required that all ships are provided with two independent steering gear systems that is one main and one auxiliary
B.The auxiliary gear could be power operated in passenger ships
C.The auxiliary gear must be of adequate strength and sufficient to steer a ship at navigable speed
D.All moving parts of the steering gear must be guarded against any possible damage
A.Only one pump should be used at any time
B.The ship speed should be reduced to 70% of the normal
C.Watch keeping of the steering gear should be increased
D.Limitations of the steering gear should be logged but the bridge need not be informed
A.Surrounding the fixed shaft is a hollow shaft
B.This hollow shaft carries radial bores
C.Each bore is fitted with a well-lapped plunger
D.There are always even numbers of bores
最新試題
An internal bypass is provided on some hydraulic system suction strainers to help reduce the possibility of ().
The general purpose of a heat exchanger is to ().
One cause of high head pressure occurring in a refrigeration system can be ().
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be ().
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump ().
Which of the following statements is correct concerning heat transfer?()
If the suction pressure at the refrigeration compressor is below normal, the cause can be().
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its ().
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by ().
The output volume of a positive fixed displacement pump can be changed only by ().