A.bleeding refrigerant from the condenser
B.opening a drain petcock on the oil separator
C.condensing the water in the heat exchanger
D.using a dehydrator cartridge
您可能感興趣的試卷
你可能感興趣的試題
A.drill holes through the heavy side of the impeller until it balances
B.weld counterweights to the light side of the impeller
C.remove metal from the heavy side by machining in a lathe
D.acid wash and serape the heavy side until it balances
A.cause loss of hydraulic oil from the system
B.result in extreme damage to the pump
C.cause damage to the pump ff not continually drained from the pump casing
D.result in the system high side pressure to substantially drop off
A.saltwater heater shell
B.second-stage condenser
C.atmosphere
D.second-stage flash chamber
A.Ash content, carbon residue, and gravity
B.Viscosity, acidity, and demulsibility
C.Pour point, flash, point, and precipitation number
D.Auto-ignition point, viscosity index, and film strength
A.Protects against suction valve float
B.Provides a positive pressure on the air inlet valves
C.Prevents lubricating oil contamination of the compressed air supply
D.Protects against the damaging effects of airborne solid particles
最新試題
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is ().
Which of the listed pumps is NOT a positive displacement pump?()
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should ().
If the head pressure of a reciprocating refrigeration compressor is excessive, ().
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its ().
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by ().
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will ().
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will ().
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by ().
Thermostatic expansion valves can be adjusted for ().