A.diaphragm type gage
B.pressure transducer
C.manometer
D.All of the above
您可能感興趣的試卷
你可能感興趣的試題
A.reduce radial thrust to the impeller
B.double the liquid velocity through the pump when compared to a single volute
C.reduce hydraulic end thrust
D.provide the effect of multi-staging
A.dirt will cause corrosion of bearing
B.bearings will leak oil excessively
C.dirt is very abrasive when mixed with grease
D.grease will become inflammable
A.promote refrigerant dehydration
B.be absorbed in the receiver
C.cause low condensing pressure
D.carry moisture and lead to corrosion
A.frosting of the liquid line
B.higher than normal head pressure
C.a clear sight glass
D.abnormally cold reefer boxes
A.The hose should not be twisted
B.The hose should be protected with a sleeve if it is subjected to rubbing
C.There should be some slack in the hose
D.All of the above
最新試題
The usual symptoms of cavitation in a centrifugal pump is （）.
The output volume of a positive fixed displacement pump can be changed only by （）.
Thermostatic expansion valves can be adjusted for （）.
When a refrigeration compressor has developed a high head pressure as a result of a refrigerant overcharge, you should （）.
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump （）.
The rate of heat transfer from a hot region to a cold region is affected most by the （）.
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will （）.
A grease gun is generally used to lubricate a （）.
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by （）.
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by （）.