A.electric motor
B.volute
C.impeller
D.diffusion nozzle
您可能感興趣的試卷
你可能感興趣的試題
A.expansion valve to overfeed
B.compressor to knock
C.water regulating valve to fail
D.crankcase drains to plug
A.poor distillate quality
B.reduced evaporator capacity
C.low brine concentration
D.improper vacuum regulation
A.refrigerant boiling out of solution from the lube oil
B.liquid refrigerant flooding the compressor and system
C.lube oil viscosity being reduced by refrigerant dilution
D.compressor suction pressure suddenly increasing
A.It is corrosive
B.It is odorless
C.It is visible as h blue fog
D.It has a distinctive taste
A.settling in a fuel tank
B.testing in a laboratory centrifuge
C.burning in a calorimeter
D.testing in a closed cup
最新試題
The output volume of a positive fixed displacement pump can be changed only by （）.
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by （）.
The control mode in which the final control element is moved from one of two flexed positions to the other is known as （）.
A grease gun is generally used to lubricate a （）.
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by （）.
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?（）
The usual symptoms of cavitation in a centrifugal pump is （）.
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should （）.
Which of the problems listed would came the discharge temperature of an R-12 refrigeration compressor to increase?（）
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will （）.