A.compressor damage from improper lubrication
B.refrigerant absorption by the lubricant
C.increased viscosity in the lubricant
D.carbon deposit on the compressor suction valves
您可能感興趣的試卷
你可能感興趣的試題
A.Spring-centered valve
B.Unloading valve
C.Three-position valve
D.Two-position valve
A.Expansion valve
B.Condenser
C.Evaporator
D.Compressor
A.The condenser and the expansion valve
B.The king valve and the solenoid valve
C.The compressor and the expansion valve
D.The condenser and the solenoid valve
A.temperature and pressure
B.humidity and temperature
C.pressure and vacuum
D.pressure and humidity
A.capacity of 0%
B.efficiency of 100%
C.internal slippage of 0%
D.shut off horsepower rating of 100%
最新試題
A pressure drop through the refrigerant liquid line may cause （）.
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will （）.
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by （）.
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is （）.
Which of the following problems could cause the high pressure cutout switch to shut down the compressor in a refrigeration system?（）
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be （）.
The rate of heat transfer from a hot region to a cold region is affected most by the （）.
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by （）.
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by （）.
The output volume of a positive fixed displacement pump can be changed only by （）.