A.compartmentalization
B.watertight integrity
C.structural support
D.tank boundaries
您可能感興趣的試卷
你可能感興趣的試題
A.should be supported at 24 inch intervals with plastic tie wraps
B.should never be located in a tank
C.must be installed in conduit
D.All of the above
A.uncorrected KG
B.maximum allowed KG
C.virtual height of the center of gravity
D.metacentric height
A.The required oily-water separator malfunctions
B.The ship is transferred to Liberian registry
C.An annual survey is conducted fifteen months after the date of certificate issuance
D.A 15 ppm oily-water separator is replaced by a 100 ppm oily-water separator
A.open and individual tank valves open
B.open and the individual tank valves closed
C.closed and the individual tank valves closed
D.closed and the individual tank valves open
A.start to load at maximum pressure
B.start to load slowly
C.increase the air flow into the tank
D.use the overall method of loading only
最新試題
In setting the valves on a steam-smothering system on a tanker，the master control valve to cargo tanks should be（）.
On the all-purpose nozzle，the position of the valve when the handle is all the way forward is（）.
How must each storage tank for helicopter fuel on a ship be marked?（）
Individual wires，used in systems greater than 50 volts,（）.
Of the following，the most important consideration for a tanker is（）.
Every oil tanker operating with dedicated clean ballast tanks shall be（）with a Dedicated Clean Ballast Tank Operation Manual detailing the system and specifying operational procedures.
Existing crude oil tankers may，（）being provided with segregated ballast tanks or operating with a cargo tank cleaning procedure using crude oil washing，operate with dedicated clean ballast tanks in accordance with the specified provision of the Regulation.
Each fire pump on a tanker must have a pressure gauge located at（）.
Before you start an engine in a compartment，it’s MOST important to（）.
Joiner bulkheads on a vessel provide（）.