A.innage
B.thievage
C.ullage
D.the tank's datum point
您可能感興趣的試卷
你可能感興趣的試題
A.compartmentalization
B.watertight integrity
C.structural support
D.tank boundaries
A.should be supported at 24 inch intervals with plastic tie wraps
B.should never be located in a tank
C.must be installed in conduit
D.All of the above
A.uncorrected KG
B.maximum allowed KG
C.virtual height of the center of gravity
D.metacentric height
A.The required oily-water separator malfunctions
B.The ship is transferred to Liberian registry
C.An annual survey is conducted fifteen months after the date of certificate issuance
D.A 15 ppm oily-water separator is replaced by a 100 ppm oily-water separator
A.open and individual tank valves open
B.open and the individual tank valves closed
C.closed and the individual tank valves closed
D.closed and the individual tank valves open
最新試題
Joiner bulkheads on a vessel provide（）.
Every existing product carriers of 40000 tons deadweight and above shall be provided with segregated ballast tanks and shall comply with the specified requirements，or，alternatively，operate with（）in accordance with the convention.
Gasoline fuel tank vents should terminate（）.
Every oil tanker operating with dedicated clean ballast tanks shall be（）with a Dedicated Clean Ballast Tank Operation Manual detailing the system and specifying operational procedures.
Individual wires，used in systems greater than 50 volts,（）.
ACCIDENTAL ESCAPE OF OIL OUT OF A TANK WHEN IT GETS TOO FULL BECAUSE PUMPING WAS NOT STOPPED IN TIME defines（）.
Increasing the number of slack liquid tanks has the effect of raising the（）.
In which case is the IOPP Certificate of an inspected vessel NOT invalidated? （）
Every new crude oil tanker of 20000 tons deadweight and above shall be fitted with a cargo tank cleaning system using（）.
Functions aboard a tanker or tank barge such as connecting，disconnecting，and topping off must be supervised by（）.