A.after torque causes line pull to exceed the rated capacity of the winch
B.before the line pull reaches the rated capacity of the winch
C.when the line pull reaches the breaking strength of the fall
D.before the safe working load of the fall is reached
您可能感興趣的試卷
你可能感興趣的試題
A.install shoring so the shoring supports the damaged bulkheads without pushing on them
B.install shoring so that it pushes on the damaged bulkhead while supporting it
C.use jacks or chain falls to remove the set before installing shores
D.place sandbags by the bulkhead without installing shores
A.triangular-shaped plates connecting the bull chain to the topping lift
B.metal plates secured over the tops of the hawsepipes
C.faired shell plates with curvature in two directions
D.sheets of dunnage used to prevent heavy cargo from buckling the deck plates
A.assist in drydock alignment
B.improve the vessel's stability
C.protect the vessel from slamming against piers
D.reduce the rolling of the vessel
A.deeply-grooved drum on the windlass with sprockets which engage the links of the anchor chain
B.winch that is running out of control due to a failure of the overspeed trips
C.line that has jumped off the gypsyhead while under strain
D.nylon line that parts under strain and whips back in a hazardous manner
A.blind flange
B.pivot coupling
C.quick-release coupling
D.spectacle flange
最新試題
Damaged bulkheads often take a permanent set which is independent of the panting or bulge caused by water pressure. To control this,you should().
Owing to the greater girth of a ship amidships than at the ends,certain strakes are dropped as they approach the bow and stern to reduce the amount of plating at the ends. These strakes are called().
The riding pawl is().
Ship’s steering gear refers to().
The purpose of cant frames in steel vessels is().
One function of a bulwark is to().
In vessel construction,a greater number of watertight bulkheads results in().
The strake on each side of the keel is called a().
Electric cargo winches have an overload safety device which normally cuts the current to the winch motor().
Bilge keels are fitted on ships to().