A.chlorine water
B.ozone
C.hypo-calcium chloride
D.calcium oxide
您可能感興趣的試卷
你可能感興趣的試題
A.deposition chamber
B.oxidation pool
C.disinfection chamber
D.all chamber
When does auxiliary burner of rotary nozzle incinerator begin to work? （）
Ⅰ.hen igniting
Ⅱ.he sludge for dealing with is too much
Ⅲ.efore stopping incinerator
A.Ⅰ+Ⅱ
B.Ⅰ+Ⅲ
C.Ⅱ+Ⅲ
D.Ⅰ+Ⅱ+Ⅲ
A.After stopping supplying sludge oil, the value and pipe should be flushed by flushed by diesel oil and the incinerator continue burning for 10 minutes
B.Close auxiliary burner firstly and then close main burner
C.After stopping fuel, restoring the position of main fuel supply valve
D.Stop blower as soon as stopping supplying fuel oil
A.Scavenging time should be more 30 seconds before igniting
B.The temperature of sludge tank is 80~100℃
C.First igniting the incinerator with diesel oil, when the temperature of health is about 600℃, the sludge oil drawn in
D.The ash can be dumped into sea when the distance is more than 3 miles from land
When does auxiliary burner of incinerator put into operation? （）
Ⅰ.tart incinerator when it is cold
Ⅱ.he sludge for dealing with is little
Ⅲ.he sludge for dealing with is large
Ⅳ.he water and impurity in sludge are too much
Ⅴ.he temperature in incinerator is low
Ⅵ.ealing with little solid rubbish
A.Ⅰ+Ⅱ+Ⅲ+Ⅴ
B.Ⅰ+Ⅱ+Ⅲ+Ⅳ
C.Ⅰ+Ⅳ+Ⅴ+Ⅵ
D.Ⅰ+Ⅱ+Ⅲ+Ⅵ
最新試題
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
Using a file without a handle may result in （）