A.keep all systems in normally running
B.the main engine is stand-by
C.shut off the starting air bottle outlet valve
D.pay attention to the changes of the system parameters
您可能感興趣的試卷
你可能感興趣的試題
A.fuel valve
B.the starting air valve
C.the sea chest
D.the main sea pump inlet valve
A.shut off the starting air receiver outlet valve
B.stop the FO priming transfer pump and shut off the correspondence inlet and outlet valve
C.stop the SW pump immediately and shut off the correspondence inlet and outlet valve
D.stop the FW pump immediately and shut off the correspondence inlet and outlet valve
A.overload
B.the odds of the load
C.the default of parts
D.overload and the odds of the load
A.testing for the mechanical load and the thermal load
B.inspecting thermal and mechanical condition of the engine
C.inspecting each system and exhaust temperature
D.testing for compress pressure and explosion pressure
A.the highest
B.above 3/4
C.1/2-3/4
D.the lowest
最新試題
The treatment of the fuel oils involves storage, heating, filtering and()
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
Flame failure in an automatically fired auxiliary boiler can from a/an ()
The condensers located in various stages of a flash evaporator are cooled by()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
Diesel engine air start system check valves are opened by ()
The cetane rating of diesel fuel is an indication of the ()
The shipboard oil pollution emergency plan will be invalid after ()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()