An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network.
What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）
A. The switch that will share its VLAN configuration must be in VTP server mode.
B. The switches must be in the same VTP domain.
C. The switch that will share the VLAN information must be configured as the root bridge.
D. The switches must be connected over VLAN trunks.
E. The switches must be configured to use the same STP version.
F. The switches must have VTP pruning activated.
您可能感興趣的試卷
你可能感興趣的試題
A. By default, all defined VLANs are allowed on the trunk.
B. Each single VLAN, or VLAN range, must be specified with the switchport mode command.
C. Each single VLAN, or VLAN range, must be specified with the vtp domain command.
D. Each single VLAN, or VLAN range, must be specified with the vlan database command.
A. They increase the size of collision domains.
B. They allow logical grouping of users by function.
C. They can enhance network security,
D. The increase the size of broadcast domains while decreasing the number of the broadcast domains.
E. The increase the number of broadcast domains while decreasing the size of the broadcast domains.
F. They simplify switch administration.
A. Switch(vlan)# mode trunk
B. Switch(config)# switchport access mode trunk
C. Switch(config-if)# switchport mode trunk
D. Switch(config-if)# switchport trunk encapsulation dot1q
E. Switch(config)# switchport access mode 1
F. Switch(vlan)# trunk encapsulation dot1q
A. VLANs allow access to network services based on department, not physical location.
B. VLANs utilize packet filtering to enhance network security.
C. VLANs provide a low-latency, high bandwidth internetworking alternative.
D. VLANs provide a method of communication between IP addresses in large networks.
E. VLANs establish segmented broadcast domains in switched networks.
F. VLANs can greatly simplify adding, moving, or changing hosts on the network.
A. VLANs logically divide a switch into multiple, independent switches at Layer 2.
B. Trunk links can carry traffic for multiple VLANs.
C. VLAN implementation significantly increases traffic due to added trunking information.
D. VLANs can span multiple switches.
E. VLANs typically decrease the number of switches needed
最新試題
Identify three valid host addresses in the 192.168.27.0 network with a subnet mask of 255.255.255.240. （）
TestKing.com has allocated the IP add 199.144.27.0 is its network, to provide flexibility for the LAN design, a subnet mask of 255.255.255.240 has been chosen. Which of the following address can be assigned to LAN on the resulting subnets.（）
An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? （）
The network 172.12.0.0 needs to be divided into subnets where each subnet has the capacity of 458 IP addresses.What would be the correct subnet mask to accomplish this division keeping the number of subnets at the maximum? （）
What is the subnetwork address for a host with IP address 201.100.5.68/28?（）
All WAN links is side the TestKing.com network use PPP with for authentication security. Which command will display the CHAP authentication process as it occurs between two routers in the network?（）
New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? （）
Which of the following contribute to congestion on an Ethernet network?（）
A Router with a BRI/T interface will be used for an ISDN Connection what other ISDN device is required to complete this connection? （）
What is a global command?（）